Your electronics at your fingertips AND protected from inclement weather -
and you can easily see/read them!(Please Note: this product is intended to be
used with the eCaddy Lite)!
The Cosmos Caddy-Buddy can be used with:
iPods/MP3 players
Satellite radios
GPS
Digital assistants (Blackberry, Palm Pilot, etc.)
Toll passes (iPass, EZ-Pass, SunPass)
Cell phones
Wallet
Cigarettes
Keys
and more!
The Cosmos Caddy-Buddy measures 4.25" x 5.5" mountable at SIX different angles
when used with the eCaddy Lite (please check the
dimensions of the item you wish to put in it). It has a clear
cover that allows you to view your items while also protecting
them from rain. (Note: If using with electronics containing a plug,
you may choose to cut a small hole in the vinyl.
The back side contains a rigid plastic clip that makes the Cosmos
easy to use anywhere - and it can go from your handlebar to your
waist in seconds.
Get multiple uses with this simple add-on item -
works with all Leader mounting brackets!
For mounting cell phones, iPods, smaller GPS units,
CBs, Palm Pilots, Cameras, toll passes - anything with a standard belt clip!
This kit easily mounts to boats; ATVs/utility vehicles; classic cars/hot rods;
trucks; RVs; golf carts; aircraft - almost ANY flat surface!
USE WITH:
Cell phones
MP3 (iPod, etc.)
Smaller GPS units (Garmin, Magellin, etc.)
CBs (Motorola, Midland, etc.)
Palm pilots / PDAs
pagers
camera bags
almost any belt clip or holster
KIT INCLUDES:
Electronics holding plate: multi-faceted lug offers
SIX different angles. Wide plate area provides extra security, while
clip "notch" accommodates a wide variety of clips (see examples below).
Max clip width: 1-1/16". Clip length: 1-3/8" - 1-7/8".
Universal mounting bracket with UltraSecure: slender allen
screw that installs cross-wise after sliding the plate in means you'll
never lose your electronics!
SAFE: You'll know where your equipment is at all times!
SECURE: Easily viewed and won't bounce out!
UltraSecure feature gives you extra insurance!
CONVENIENT: Simple design makes it easy to remove your
electronics when not using!
CLASSY: Slim, attractive design doesn't get in your way
and fits your "look"!
PROTECT IT with the COSMOS CADDY-BUDDY!
At your fingertips - AND protected from the elements with the
NEW Cosmos Caddy-Buddy! Designed specifically for the eCaddy Lite.
Clear front and rigid clip on back for convenience and security.
Dimensions: 4.25"W x 5.5"H (please check the size of the item you wish to place in it).
Good for toll passes too! Just $16.99!
This kit easily mounts to all Gold Wings, scooters and metric brake reservoirs (see Fitment tab for details).
It can be mounted on either the RIGHT or the LEFT side.
Also available for Round Bars.
Your item MUST have a case or holster with
a belt clip to use this kit alone. If it does NOT, we highly recommend purchasing the Caddy Buddy
(see Related Items tab for details).
Electronics holding plate: multi-faceted lug offers SIX different angles.
Wide plate area provides extra security, while clip "notch" accommodates a
wide variety of clips (see examples below). Max clip width: 1-1/16". Clip length: 1-3/8" - 1-7/8".
Reversible mounting bracket so you can mount it on left or right side
Patent #449814S
$64.99
eCaddy Lite - Harley-Davidson switch housing - for phone, iPod/MP3
This kit easily mounts to all Harley-Davidson handlebar controls (see Fitment tab for details).
It is especially useful the large dressers with minimal handlebar space (Ultra Glides, Electra Glides,
Road Glides, Street Glides and Road Kings). It can be mounted on either the RIGHT or the LEFT side.
Also available for Round Bars.
Your item MUST have a case or holster with
a belt clip to use this kit alone. If it does NOT, we highly recommend purchasing the Caddy Buddy
(see Related Items tab for details).
Electronics holding plate: multi-faceted lug offers SIX different angles.
Wide plate area provides extra security, while clip "notch" accommodates a
wide variety of clips (see examples below). Max clip width: 1-1/16". Clip length: 1-3/8" - 1-7/8".
Mounting bracket with UltraSecure (slender allen screw
that installs cross-wise after sliding the plate in).
This kit easily mounts to motorcycle handlebars, engine guard bars, or any other bar
(3/4" to 1-1/4" diameters - see Fitment tab for details). Note: Also available for Gold Wing controls and
Harley controls.
Your item MUST have a case or holster with
a belt clip to use this kit alone. If it does NOT, we highly recommend purchasing the Caddy Buddy
(see Related Items tab for details).
Electronics holding plate: multi-faceted lug offers SIX different angles.
Wide plate area provides extra security, while clip "notch" accommodates a
wide variety of clips (see examples below). Max clip width: 1-1/16". Clip length: 1-3/8" - 1-7/8".
Mounting bracket with UltraSecure (slender allen screw
that installs cross-wise after sliding the plate in).
Mounting bracket with UltraSecure (slender allen screw
that installs cross-wise after sliding the plate in).
Electronics holding plate: multi-faceted lug offers SIX different angles.
Wide plate area provides extra security.
Caddy Buddy weather-proof case with sewn-in belt clip and clear front cover. Velcro flap closure. Dimensions: 4.25" x 5.5".
How it Works:
Install mounting bracket (see link to video at right). Position eCaddy plate at desired angle. Clip Caddy Buddy (pouch) to eCaddy. Slip
toll pass into Caddy Buddy. That's it!
SAFE: You'll know where your toll pass is at all times!
SECURE: Won't bounce out!
UltraSecure feature gives you extra insurance!
CONVENIENT: Simple design makes it easy to remove your
toll pass when not using!
CLASSY: Slim, attractive design doesn't get in your way
and fits your "look"!
Patent #449814S
$85.99
eCaddy Lite Toll Pass Mount for Harley-Davidson Controls
This kit easily mounts to all Harley-Davidson handlebar controls (screw spacing 1.5"). It can be mounted on either the RIGHT or the LEFT side.
(Also available for Round Bars.)
KIT INCLUDES:
Mounting bracket with UltraSecure (slender allen screw
that installs cross-wise after sliding the plate in).
Electronics holding plate: multi-faceted lug offers SIX different angles.
Wide plate area provides extra security.
Caddy Buddy weather-proof case with sewn-in belt clip and clear front cover. Velcro flap closure. Dimensions: 4.25" x 5.5".
How it Works:
Install mounting bracket. Position eCaddy plate at desired angle. Clip Caddy Buddy (pouch) to eCaddy. Slip
toll pass into Caddy Buddy. That's it!
USE WITH:
EZ Pass
iPass
Sun Pass
Other toll transponders
SAFE: You'll know where your toll pass is at all times!
SECURE: Won't bounce out!
UltraSecure feature gives you extra insurance!
CONVENIENT: Simple design makes it easy to remove your
toll pass when not using!
CLASSY: Slim, attractive design doesn't get in your way
and fits your "look"!
This kit easily mounts to motorcycle handlebars, engine guard bars, or any other bar
(3/4" to 1-1/4" diameters - see Fitment tab for details). Note: Also available for Gold Wing controls and
Harley controls.
Your item MUST have a case or holster with
a belt clip to use this kit alone. If it does NOT, we highly recommend purchasing the Caddy Buddy
(see Related Items tab for details).
Electronics holding plate: multi-faceted lug offers SIX different angles.
Wide plate area provides extra security, while clip "notch" accommodates a
wide variety of clips (see examples below). Max clip width: 1-1/16". Clip length: 1-3/8" - 1-7/8".
Mounting bracket with UltraSecure (slender allen screw
that installs cross-wise after sliding the plate in).
Patent #449814S
$69.99
eCaddy Lite for iPod/MP3 - for Harley-Davidson controls
This kit easily mounts to all Harley-Davidson handlebar controls (see Fitment tab for details).
It is especially useful the large dressers with minimal handlebar space (Ultra Glides, Electra Glides,
Road Glides, Street Glides and Road Kings). It can be mounted on either the RIGHT or the LEFT side.
Also available for Round Bars.
Your item MUST have a case or holster with
a belt clip to use this kit alone. If it does NOT, we highly recommend purchasing the Caddy Buddy
(see Related Items tab for details).
Electronics holding plate: multi-faceted lug offers SIX different angles.
Wide plate area provides extra security, while clip "notch" accommodates a
wide variety of clips (see examples below). Max clip width: 1-1/16". Clip length: 1-3/8" - 1-7/8".
Mounting bracket with UltraSecure (slender allen screw
that installs cross-wise after sliding the plate in).
This kit easily mounts to all Gold Wings, scooters and metric brake reservoirs (see Fitment tab for details).
It can be mounted on either the RIGHT or the LEFT side.
Also available for Round Bars.
Your item MUST have a case or holster with
a belt clip to use this kit alone. If it does NOT, we highly recommend purchasing the Caddy Buddy
(see Related Items tab for details).
Electronics holding plate: multi-faceted lug offers SIX different angles.
Wide plate area provides extra security, while clip "notch" accommodates a
wide variety of clips (see examples below). Max clip width: 1-1/16". Clip length: 1-3/8" - 1-7/8".
Reversible mounting bracket so you can mount it on left or right side