Note: If you have a Garmin Nuvi or Tom Tom, please refer to those pages.
Here’s how to tell if this kit will work for you:
Some units have the 4-hole "AMPS" pattern or diamond-shaped "RAM" pattern right on their backside, or on the
back of the "cradle" (if one came with your GPS). (Note: You may need to remove the suction cup.)
Some units require the purchase of a "cradle."
In either case, all you need to mount it on a motorcycle is this kit!
This kit easily mounts to all Harley-Davidson handlebar controls (screw spacing 1.5"). FITS BOTH LEFT- AND RIGHT-SIDE CONTROLS!
See details/video under the Fitment Tab.
Kit includes:
eCaddy Deluxe holding plate (chrome): multi-faceted lug offers
SIX different angles. Includes four application screws. Plate area
dimensions: 1-13/16" x 1-1/2" x 5/16" with standard "amps" pattern threaded holes (1.25" x 1.5")
Mounting bracket with UltraSecure (chrome): slender allen screw
that installs cross-wise after sliding the plate in means you'll
never lose your GPS!
Have trouble reading the screen on your iPhone? Sun glare on your GPS?
Get Tilted!
The UltraTilt offers mazing "angle-ability" - tilt it wherever you need it! Installs between the eCaddy Deluxe
plate and the GPS, iPod, iPhone or satellite radio.
We highly recommend the use of the UltraTilt:
when line-of-sight is important (e.g., when following directions from a GPS)
the farther from the center you intend to mount your item, the more highly we recommend the UltraTilt
when using the Harley or Gold Wing switch housing mounts
Includes 14mm metric screws (4); nuts (4); 8-32 screws (2); and Washers (2)
If you've ever wanted or needed to get your GPS, iPod, iPhone, satellite radio or other electronics UP or OUT
a bit (for example, maybe it's too close to your tank or fairing)... The UltraTech is for you!
When used with the eCaddy Deluxe, your item can be mounted at not
just six angles - but TWELVE angles! Combine it with the UltraTilt,
and there's literally NO limit to where and how you can mount!
And there's MORE: The UltraTech plate can be bent up to 120 degrees!
Now you have another option for those hard-to-mount items!
NOTE: The Ultra-Tech plate is intended for use with the eCaddy mounting system.
Shown above with eCaddy Deluxe plate (additional $24.99). Dimensions: 5" x 2".
For more information about how this product can be used with our products, see our "How to" Guides:
The Aqua Box gives your electronics the protection you need!
(Please Note: this product is intended to be used with the eCaddy Deluxe -
attachment point shown at right)
USE WITH:
GPS (Garmin, Magellan, Tom Tom, etc.)
Satellite radio (Delphi, Sirius, XM, etc.)
Cell phones (iPhone, Smart phones, etc.)
iPod or other MP3 players
CBs (Motorola, Midland, etc.)
Palm pilot, Blackberry and other PDAs
Pagers
Cameras/Camcorders
FEATURES:
"Flex-Lens" cover seals solidly to repel water, AND it
allows you to touch/operate buttons/dials through the screen.
Note: this cover is too thick for the "slide" operation
common on newer smart phones.
Power, earphone and accessory cables/wiring can be routed through a
moisture-repellant baffle at the back.
Marine-grade construction includes stainless steel pins and hardware.
It's also lockable (although a lock is not included)
Available in three sizes (see Fitment Tab)
For more information about how this product can be used with our products, see our "How to" Guides:
Works with electronic devices that utilize a Mini USB connector.
Not sure if your device is Mini USB? See the photo at right for help!
Click
here to go to Micro USB.
Cable mounted in-line regulator assures the voltage is properly stepped down to 5V.
Direct to battery 60" fused harness.
Includes adapter to accommodate 90-degree angle plugs.
Quickly install a Cigarette socket on any vehicle. This kit does not require drilling or mounting a bracket. The SAE led is secured quickly with tywraps and can be hidden from sight. The SAE to Cigarette adapter can be stored when not in use. Fused at 15 Amps.
$29.99
eCaddy Deluxe Mounting Kit for all other GPS - BLACK (for Harley controls)
Note: If you have a Garmin Nuvi or Tom Tom,
please refer to those pages.
Here’s how to tell if this kit will work for you:
Some units have the 4-hole "AMPS" pattern or diamond-shaped "RAM" pattern right on their backside, or on the
back of the "cradle" (if one came with your GPS). (Note: You may need to remove the suction cup.)
Some units require the purchase of a "cradle."
In either case, all you need to mount it on a motorcycle is this kit!
This kit easily mounts to all Harley-Davidson handlebar controls (screw spacing 1.5"). FITS BOTH LEFT- AND RIGHT-SIDE CONTROLS!
See details/vide under the Fitment Tab.
Kit includes:
eCaddy Deluxe holding plate: multi-faceted lug offers
SIX different angles. Includes four application screws. Plate area
dimensions: 1-13/16" x 1-1/2" x 5/16" with standard "amps" pattern threaded holes (1.25" x 1.5")
Mounting bracket with UltraSecure: slender allen screw
that installs cross-wise after sliding the plate in means you'll
never lose your GPS!
Note: If you have a Garmin Nuvi or Tom Tom,
please refer to those pages.
Here’s how to tell if this kit will work for you:
Some units have the 4-hole "AMPS" pattern or diamond-shaped "RAM" pattern right on their backside, or on the
back of the "cradle" (if one came with your GPS). (Note: You may need to remove the suction cup.)
Some units require the purchase of a "cradle."
In either case, all you need to mount it on a motorcycle is this kit!
This kit mounts on a round bar: motorcycle handlebars, engine guard bars, etc. (3/4" to 1-1/4" diameters).
See the sizing chart under the Fitment Tab.
Kit includes:
eCaddy Deluxe holding plate (chrome): multi-faceted lug offers
SIX different angles. Includes four application screws. Plate area
dimensions: 1-13/16" x 1-1/2" x 5/16" with standard "amps" pattern threaded holes (1.25" x 1.5")
Mounting bracket with UltraSecure (chrome): slender allen screw
that installs cross-wise after sliding the plate in means you'll
never lose your GPS!
Note: If you have a Garmin Nuvi or Tom Tom,
please refer to those pages.
Here’s how to tell if this kit will work for you:
Some units have the 4-hole "AMPS" pattern or diamond-shaped "RAM" pattern right on their backside, or on the
back of the "cradle" (if one came with your GPS). (Note: You may need to remove the suction cup.)
Some units require the purchase of a "cradle."
In either case, all you need to mount it on a motorcycle is this kit!
This kit mounts on a round bar: motorcycle handlebars, engine guard bars, etc. (3/4" to 1" diameters).
See the sizing chart under the Fitment Tab.
Kit includes:
eCaddy Deluxe holding plate (black): multi-faceted lug offers
SIX different angles. Includes four application screws. Plate area
dimensions: 1-13/16" x 1-1/2" x 5/16" with standard "amps" pattern threaded holes (1.25" x 1.5")
Mounting bracket with UltraSecure (black): slender allen screw
that installs cross-wise after sliding the plate in means you'll
never lose your GPS!
Cures poor visibility caused by glare and bright sun.
Provides greater display visibility and brightness.
Stops GPS display from reflecting in your windshield at night.
Won't interfere with GPS reception
Our Glare Guards are Soft and Flexible - won't hurt you... won't hurt your gear.
How It Works
The GPS anti-glare sun screen attaches with a narrow 3/8" strip of 'peel & stick' Velcro specially
formulated for warm conditions. It won't melt when exposed to hot sun, and can be easily removed when
you're ready... leaving little or no residue.
These GPS Glare Shields can remain on your device. They fold right over the display screen to cushion
your delicate touch-screen or color display with a soft layer of padded protection.
Choose from two sizes
Small fits GPS case widths from 3.5 to 4.5 inches
Medium fits GPS case widths from 4.5 to 5.5 inches
See Fitment Tab for additional details
Will not blow off!
We recommend your bike have a windscreen.
Unprotected from direct wind blast the visor may 'flutter' causing a distraction to the rider.
Your Garmin, TomTom, Magellan (etc) GPS will never lose power while you're
on the road! And no wiring to your motorcycle battery!
Ultra-SOL Solar-Powered Electronics Mounting Kits include everything you need for a convenient and worry-free
ride:
Mounting bracketry & hardware
Comes with a base bracket and the eCaddy Ultra,
which allows both solar panel and electronic device to be mounted in one compact unit.
For details about the different mounting options, check on the Fitment Tab.
This kit can be mounted either horizonatally OR vertically!
Outdoor solar panel by Brunton
This mini solar panel collects and stores power from the sun
(or electrical outlet, vehicle or computer), then transfers it
to electronic devices as needed.
FEATURES: Water resistant; Durable rubberized shell; Internal rechargeable Lithium Polymer battery;
Power gauge and auto shut-off; Dimensions: 5.5"x3"x.75"; Weight: 6.6 oz.; Mini-USB output;
Charges from solar panel, outlet, computer USB or included DC adapter.
See more solar panel details.
"Ultra-Swivel" feature
Allows you to move and tilt the solar panel (and the electronic device if desired) in any direction to
absorb direct sunlight - no special tools required.
Holding cradle (if required)
Choose your GPS model from the dropdown menu above. If your model does not appear on this list, please
refer to our GPS mounting guide
(see the red text).
It's true: You DON'T have to wire anything! And, when not in use, the Ultra-SOL can be easily removed and
stored in a saddlebag.
Patent pending.
RECOMMENDED OPTIONAL ITEMS
Optional Items can be added using the drop-down menus above. Details about each can be
found under the Related Products tab.
Anti-Glare Sun Screen eliminates the sun's reflection off the GPS screen and makes riding easy on
your eyes!
Aqua Box gives your GPS the rain and water protection you need!
Never Lose Power - Without wiring to your motorcycle battery!
Ultra-SOL Solar-Power Docking Station includes everything you need to power small electronics like
phones, GPS, radio, iPod/MP3.
This Kit assumes you already have your electronic device mounted and wish to add solar power
(in other words, it does NOT include the mount for your phone, GPS, radio, iPod, etc.). See the other
products in Solar Powered Mounts for
complete solar-mounted kits. See the categories (at top left) for Electronics mounts (without solar).
Kit includes:
Mounting bracketry & hardware
Choose your desired Base Mounting Bracket from the dropdown menu above.
For details about the different mounting options, check on the Fitment Tab.
This kit can be mounted either horizonatally OR vertically!
Outdoor solar panel by Brunton
This mini solar panel collects and stores power from the sun (or electrical outlet, vehicle or computer),
then transfers it to electronic devices as needed.
FEATURES: Water resistant; Durable rubberized shell; Internal rechargeable Lithium Polymer battery;
Power gauge and auto shut-off; Dimensions: 5.5"x3"x.75"; Weight: 6.6 oz.; Mini-USB output;
Charges from solar panel, outlet, computer USB or included DC adapter.
See more solar panel details.
"Ultra-Swivel" feature
Allows you to move and tilt the solar panel in any direction to
absorb direct sunlight - no special tools required.
It's true: You DON'T have to wire anything! And, when not in use, the Ultra-SOL can be easily removed and
stored in a saddlebag.
Patent pending.
RECOMMENDED OPTIONAL ITEMS
Optional Items can be added using the drop-down menus above. Details about each can be
found under the Related Products tab.
Aqua Box gives your electronics the protection you need!
INDEPENDENT REVIEW: "Made in the USA: Realizing Cheaper Isn't Better" (CityBike)
Great article about why buying American Made is still possible (and even preferable) for motorcycle accessories. Highlights Leader Motorcycle as an example company. Read More.