If you want your coffee (or water, or ...) but you want
to look good too - the Roadrunner is for you!
Two Options! The Roadrunner motorcycle drink holder with either a travel mug OR
the "Ultra-Snap" insert that holds cans, water bottles, coffee cups, etc!
This motorcycle drink holder easily mounts to all Harley-Davidson handlebar controls (screw spacing 1.5").
FITS BOTH LEFT- AND RIGHT-SIDE CONTROLS!
Kit includes mounting bracket with UltraSecure, faceted ring, and EITHER mug OR "Ultra-Snap" insert
(or get both by adding from the dropdown menu above).
FEATURES:
Made in the USA
Bracket and ring are all CHROME
Ring and cup/insert will never bounce out
You can mount horizontally OR vertically!
13.5-ounce travel mug will keep your drink hot/cold and WON'T SPILL
"Ultra-Snap" insert features elastic gripping band for cans, water bottles, coffee cups, etc.
WHY BUY OURS?
Roadrunner Drink Holder
Other motorcycle drink holders
Bracket, ring & insert are made in Minnesota, USA!
Made in China or Taiwan
Machined aluminum (by real people!), then chrome plated and "hung" to dry
Die-cast aluminum machine-polished during chrome process (can leave unfinished and/or uneven chrome on corners/edges)
Chrome plated in the USA. Environmental safety laws are followed during chrome plating process.
Chrome plated in China or Taiwan. No laws protecting people or environment from potentially harmful chemicals.
Patented slot-and-lug design offers SIX different angle settings
"Fixed" or "swivel" settings
Easy slide-in slot-and-lug design means NO extra hardware required
Requires a shim, a washer, a thumb nut and manual adjustments
UltraSecurity pin offers extra insurance against losing components
None
Mug/insert and ring can be removed, leaving only an unobtrusive chrome bracket on bike
Difficult to remove; heavy "arm" or "clamp" remains
Cup is double-walled, so your drink stays hot or cold
No insulation
Easy open lid: click with one hand
"Flip" opening tends to spill and/or leak, and can fly off if not pushed down far enough
Optional "Ultra-Snap" insert with elastic gripping band for pop cans, water bottles, coffee cups, etc.
None
No logo or brand name on cup
You're stuck with their name on it everywhere you go
SERVICE: We're a family-owned company and we stake our reputation on quality and service
They're a big, impersonal company
Patent No. D449,814S
Fits all Harley-Davidson handlebar switch housing/controls (screw spacing 1.5"). FITS EITHER BRAKE OR CLUTCH (LEFT OR RIGHT) SIDE CONTROLS!
HARLEY-DAVIDSON CONTROLS MOUNT INSTALLATION
Name
Price
Roadrunner Motorcycle Drink Holder - BLACK - Harley-Davidson controls
If you want your coffee (or water, or ...) but you want
to look good too - the Roadrunner is for you!
Two Options! The Roadrunner motorcycle drink holder with either a travel mug OR
the "Ultra-Snap" insert that holds cans, water bottles, coffee cups, etc!
This motorcycle drink holder easily mounts to all Harley-Davidson handlebar controls (screw spacing 1.5").
FITS BOTH LEFT- AND RIGHT-SIDE CONTROLS!
Kit includes mounting bracket with UltraSecure, faceted ring, and EITHER mug OR "Ultra-Snap" insert
(or get both by adding from the dropdown menu above).
FEATURES:
Made in the USA
Bracket and ring are beautiful black anodized
Ring and cup/insert will never bounce out
You can mount horizontally OR vertically!
13.5-ounce travel mug will keep your drink hot/cold and WON'T SPILL
"Ultra-Snap" insert features elastic gripping band for cans, water bottles, coffee cups, etc.
WHY BUY OURS?
Roadrunner Drink Holder
Other motorcycle drink holders
Bracket, ring & insert are made in Minnesota, USA!
Made in China or Taiwan
Patented slot-and-lug design offers SIX different angle settings
"Fixed" or "swivel" settings
Easy slide-in slot-and-lug design means NO extra hardware required
Requires a shim, a washer, a thumb nut and manual adjustments
UltraSecurity pin offers extra insurance against losing components
None
Mug/insert and ring can be removed, leaving only an unobtrusive chrome bracket on bike
Difficult to remove; heavy "arm" or "clamp" remains
Cup is double-walled, so your drink stays hot or cold
No insulation
Easy open lid: click with one hand
"Flip" opening tends to spill and/or leak, and can fly off if not pushed down far enough
Optional "Ultra-Snap" insert with elastic gripping band for pop cans, water bottles, coffee cups, etc.
None
No logo or brand name on cup
You're stuck with their name on it everywhere you go
SERVICE: We're a family-owned company and we stake our reputation on quality and service
If you want your coffee (or water, or ...) but you want
to look good too - the Roadrunner is for you!
Two Options! The Roadrunner motorcycle drink holder with either a travel mug OR
the "Ultra-Snap" insert that holds cans, water bottles, coffee cups, etc!
This motorcycle drink holder easily mounts to motorcycle handlebars or engine guard bars -
anywhere with a round bar!
Kit includes mounting bracket with UltraSecure, faceted ring, and EITHER mug OR "Ultra-Snap" insert
(or get both by adding from the dropdown menu above).
FEATURES:
Made in the USA
Bracket and ring are all CHROME
Ring and cup/insert will never bounce out
You can mount horizontally OR vertically!
13.5-ounce travel mug will keep your drink hot/cold and WON'T SPILL
"Ultra-Snap" insert features elastic gripping band for cans, water bottles, coffee cups, etc.
WHY BUY OURS?
Roadrunner Drink Holder
Other motorcycle drink holders
Bracket, ring & insert are made in Minnesota, USA!
Made in China or Taiwan
Machined aluminum (by real people!), then chrome plated and "hung" to dry
Die-cast aluminum machine-polished during chrome process (can leave unfinished and/or uneven chrome on corners/edges)
Chrome plated in the USA. Environmental safety laws are followed during chrome plating process.
Chrome plated in China or Taiwan. No laws protecting people or environment from potentially harmful chemicals.
Patented slot-and-lug design offers SIX different angle settings
"Fixed" or "swivel" settings
Easy slide-in slot-and-lug design means NO extra hardware required
Requires a shim, a washer, a thumb nut and manual adjustments
UltraSecurity pin offers extra insurance against losing components
None
Mug/insert and ring can be removed, leaving only an unobtrusive chrome bracket on bike
Difficult to remove; heavy "arm" or "clamp" remains
Cup is double-walled, so your drink stays hot or cold
No insulation
Easy open lid: click with one hand
"Flip" opening tends to spill and/or leak, and can fly off if not pushed down far enough
Optional "Ultra-Snap" insert with elastic gripping band for pop cans, water bottles, coffee cups, etc.
None
No logo or brand name on cup
You're stuck with their name on it everywhere you go
SERVICE: We're a family-owned company and we stake our reputation on quality and service
They're a big, impersonal company
Patent No. D449,814S
$74.99
RoadRunner Motorcycle Drink Holder - BLACK (for round bars)
If you want your coffee (or water, or ...) but you want
to look good too - the Roadrunner is for you!
Two Options! The Roadrunner motorcycle drink holder with either a travel mug OR
the "Ultra-Snap" insert that holds cans, water bottles, coffee cups, etc!
This motorcycle drink holder easily mounts to motorcycle handlebars or engine guard bars -
anywhere with a round bar!
Kit includes mounting bracket with UltraSecure, faceted ring, and EITHER mug OR "Ultra-Snap" insert
(or get both by adding from the dropdown menu above).
FEATURES:
Made in the USA
Bracket and ring are beautiful black anodized
Ring and cup/insert will never bounce out
You can mount horizontally OR vertically!
13.5-ounce travel mug will keep your drink hot/cold and WON'T SPILL
"Ultra-Snap" insert features elastic gripping band for cans, water bottles, coffee cups, etc.
WHY BUY OURS?
Roadrunner Drink Holder
Other motorcycle drink holders
Bracket, ring & insert are made in Minnesota, USA!
Made in China or Taiwan
Patented slot-and-lug design offers SIX different angle settings
"Fixed" or "swivel" settings
Easy slide-in slot-and-lug design means NO extra hardware required
Requires a shim, a washer, a thumb nut and manual adjustments
UltraSecurity pin offers extra insurance against losing components
None
Mug/insert and ring can be removed, leaving only an unobtrusive chrome bracket on bike
Difficult to remove; heavy "arm" or "clamp" remains
Cup is double-walled, so your drink stays hot or cold
No insulation
Easy open lid: click with one hand
"Flip" opening tends to spill and/or leak, and can fly off if not pushed down far enough
Optional "Ultra-Snap" insert with elastic gripping band for pop cans, water bottles, coffee cups, etc.
None
No logo or brand name on cup
You're stuck with their name on it everywhere you go
SERVICE: We're a family-owned company and we stake our reputation on quality and service
We've been asked about it often … and we've finally done it.
The Roadrunner drink holder is now available with either a travel mug OR
the "Ultra-Snap" insert that holds cans, water bottles, coffee cups, etc!
This item is the Ultra-Snap by itself. It includes elastic gripping band for cans, water bottles, coffee cups, etc. and is intended to be used
with the Roadrunner drink holder.
WHY BUY OURS?
Roadrunner Drink Holder
Other motorcycle drink holders
Bracket and ring are made in Minnesota, USA!
Made in China or Taiwan
Machined aluminum (by real people!), then chrome plated and "hung" to dry
Die-cast aluminum machine-polished during chrome process (can leave unfinished and/or uneven chrome on corners/edges)
Chrome plated in the USA. Environmental safety laws are followed during chrome plating process.
Chrome plated in China or Taiwan. No laws protecting people or environment from potentially harmful chemicals.
Patented slot-and-lug design offers SIX different angle settings
"Fixed" or "swivel" settings
Easy slide-in slot-and-lug design means NO extra hardware required
Requires a shim, a washer, a thumb nut and manual adjustments
UltraSecurity pin offers extra insurance against losing components
None
Mug/insert and ring can be removed, leaving only an unobtrusive chrome bracket on bike
Difficult to remove; heavy "arm" or "clamp" remains
Cup = 16 ounces
Cup = 14 ounces
Cup is insulated, so your drink stays hot or cold
No insulation
Screw-on, spring-loaded cup lid means NO spills
Plastic "push-on" lid with a flip opening tends to spill and/or leak, and can fly off if not pushed down far enough
Optional "Ultra-Snap" insert with elastic gripping band for pop cans, water bottles, coffee cups, etc.
None
No logo or brand name on cup
You're stuck with their name on it everywhere you go
SERVICE: We're a family-owned company and we stake our reputation on quality and service
They're a big, impersonal company
Try the rest - then come back for the best!
Alcohol and recreational vehicles don't mix!
Please be safe and responsible when you ride!
The eCaddy Ultra Gadget Mount: Two-in-One!
(please read the description carefully)
Cell phone. GPS. iPod/MP3. Satellite radio. And - oh, yes, coffee in the morning!
How is a rider to mount so many gadgets on their motorcycle?
This is the answer! This beautifully chromed, made-in-the-USA
mount attaches to the handlebar or controls on the Harley or Gold Wing –
no special tools required. Mount vertically OR horizontally!
Each slotted end accommodates your choice of gadgets:
GPS
iPod/MP3
iPhone/cell phone
Satellite radio
Camera
Radar detector
Blackberry (PDA)
Drink holders
Toll passes
NEVER lose 'em! Thread-lock screws and the popular UltraSecurity
feature ensure your electronics will NEVER leave your bike without
your permission!
IMPORTANT! This product is JUST the plate you see to the right (which includes the lug and 2 screws).
You can mount this bar in any of FOUR different directions, both vertically and horizontally.
Dimensions: 4-5/8" total width with the slot centers 3-1/2" apart
PLEASE NOTE: the eCaddy Ultra MUST used with other eCaddy components.
It is a build-to-your-needs product! You can order the mounting
brackets, etc, from the Extra Parts section. If you are not familiar
with our products, please call to order so you get the right components
for what you want to mount!
INDEPENDENT REVIEW: "Made in the USA: Realizing Cheaper Isn't Better" (CityBike)
Great article about why buying American Made is still possible (and even preferable) for motorcycle accessories. Highlights Leader Motorcycle as an example company. Read More.
Roadrunner Motorcycle Drink Holder - CHROME - Harley-Davidson controls Keep it "Proudly Made in America"
Reviewer: Michael
I purchased this cup holder and have used it daily for at least six months and it has more than lived up to its claims and your guarantee. I travel cross-country and "safety, quality of construction, then convenience" is how I measure my purchase. My only request is - please don't stop making such a good quality product, and keeping it "Proudly made in America"!
Roadrunner Motorcycle Drink Holder - CHROME - Harley-Davidson controls Good looks, high quality and easy installation
Reviewer: Ron Clanton
This was my first purchase in Aug 2009 after buying my Ultra Classic. It took me less than 5 minutes to install and looked great. 15,000 miles later, I can attest to the quality of the materials. I have driven through rain, snow and 115 degree temps with no sign of wear on the drink holder. It has held up to the weight of large cups and yet also holds an empty soda can tight enough that I don't litter our beautiful country side. And you will not find better customer support than what you will be offered by the good folks at Leader Motorcycle.
Basket Contents
Checkout
The eCaddy Ultra Gadget Mount: Two-in-One!
IMPORTANT! This product is JUST the plate you see to the right (which includes the lug and 2 screws).
You can mount this bar in any of FOUR different directions, both vertically and horizontally.
Dimensions: 4-5/8" total width with the slot centers 3-1/2" apart
PLEASE NOTE: the eCaddy Ultra MUST used with other eCaddy components.
It is a build-to-your-needs product! You can order the mounting
brackets, etc, from the Extra Parts section. If you are not familiar
with our products, please call to order so you get the right components
for what you want to mount!